Verify that you are using the correct AHCI or RAID system drivers for your SATA option.Įnable SATA AHCI Support - enables the embedded chipset SATA controller for AHCI - THIS IS WHAT YOU NEEDĮnable SW RAID - enables the embedded chipset SATA controller for the HPE Smart Array S100iSR Gen10 SW RAID. Press the F9 key in the ProLiant POST screen.įrom the System Utilities, select System Configuration > System Options > SATA ControllerOptions > Embedded SATA Configuration > Enable SW RAID and press the Enter key. Ive been testing VirtIO vs AHCI disk device settings with the latest version of Debian. You must be inSoftware RAID mode to use the Smart Array S100i SR Gen10 SW RAID solution on the embedded SATAports. 0-U4 Virtual Machine (bhyve) cant use DHCP to recive IP adres. The embedded SATA ports may be configured in AHCI mode or Software RAID mode. I'd suggest the problem should be directed at the Debian maintainers. If you change the configuration to point at a working build of BIOS-bochs-latest from a 2.7 release it seems to work. Take out the Raid card, and connect the cables to the onboard controller, and do the flowing: Since then I discovered the problem is specific to the ROM image file BIOS-bochs-latest produced by Debian for that release. There are a many different possible causes for these problems. The installer may also even after booting successfully from CD-ROM fail to recognize the CD-ROM or return errors while reading from it during the installation. # Linux/x86_64 4.0.0-rc2 Kernel ConfigurationĬONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"ĬONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yĬONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"ĬONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.PS: Also you cold try this, but look on you motherboard if you have any more 2 sff connectors. Sometimes, especially with older CD-ROM drives, the installer may fail to boot from a CD-ROM. # Automatically generated file DO NOT EDIT. sdhci-acpi: probe of INT33BB:00 failed with error -16 Voila There’s Windows right on your Linux desktop. Once you are done, start Bochs by pressing Enter on the main menu. Windows will scan the disk first and then you’ll be taken to the GUI installation. IOAPIC: Set routing entry (8-16 -> 0x32 -> IRQ 13 Mode:1 Active:1 Dest:15) Edit the Disk options to boot from the CD. A copy of this spec is on Bochs tech specs page. This layout is called 'El Torito Bootable CD-ROM Format Specification' and has been published by Phoenix and IBM. ffff88006d006800 ffff8800764ffad8 ffffffff810d37af ffff8800764ffad8 A bootable CD-ROM has a special layout that is detected by the BIOS boot loader code, and executed if it conforms the specifications. microcode: Microcode Update Driver: v2.00, Peter Oruba Choose your language settings, and then click Next. Insert the installation media and restart your computer. Step 2: Rebuild BCD (Boot Configuration Data) store and check for the issue. microcode: CPU3 sig=0x30673, pf=0x2, revision=0x31e Step 1: Unplug all the external devices connected to your system (except the Keyboard and mouse) and check. Git:///pub/scm/linux/kernel/git/torvalds/linux.git masterĬommit 7486341a98f26857f383aec88ffa10950087c3a1 ("x86/platform, acpi: Bypass legacy PIC and PIT in ACPI hardware reduced mode") To: aubrey.li +Cc: Ingo Molnar, LKML, LKP ML 6:18 ` Li, Aubrey 0 siblings, 1 reply 10+ messages in thread 00000000 (rtc0) archive mirror help / color / mirror / Atom feed * 7486341a98f: genirq: Flags mismatch irq 8. 7486341a98f: genirq: Flags mismatch irq 8.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |